DANROB

PL DE

Device features

  • Automatic cutting of corrugated tubing on the crest
  • Diameter Exchange System - cutting corrugated tubing of any diameter in the range NW 4.5 - NW 42mm
  • Speed of setting up the DES module (5O seconds)
  • Precise measurement of length of the sections cut

The CTCM are advanced devices designed for automatic cutting of corrugated tubing (in the perpendicular plane to the axis of the tubing), in the place of the largest diameter on the crest.  It works on the basis of the DES (Diameter Exchange System).

The DES system allows the operator to easily and efficiently set up the machine, making it possible to cut corrugated tubing of any diameter in the range from NW 4.5 to NW 42mm using the same CTCM 4OO machine. The DES system is dedicated to the specific corrugated tubing size.

The CTCM 4OO and CTCM 4OO+ series machines can cut all corrugated tubing available on the market.

Types of tubes

  • Corrugated tubing – Co-flex profile
  • Corrugated tubing – Lockflex profile
  • Corrugated tubing – Mono-flex truck profile
  • Corrugated tubing – Channel-flex profile
  • Corrugated tubing – Standard corrugation profile
  • Corrugated tubing – High corrugation profile
  • Corrugated tubing – Oval profile
  • Corrugated tubing – Standard profile

Speed

The feed speed is controlled by the operator.

There are three speed levels:

  • Minimum
  • Optimum
  • Accelerated

In the CTCM 4OO continuous quality is guaranteed by a system of sensors and precise measurement, which supervise the work of the machine.

The certainty that cut on the crest will be performed at the highest level is guaranteed by the patented DANROB currogated tubing positioning system.

Modularity

The CTCM series devices have been designed for customers for whom the continuity of operation is paramount. The CTCM series is MODULAR. Interchangeable components created by DANROB are connected together to achieve the desired results.

Benefits of modularity:

  • The ability to upgrade during use
  • Cost savings
  • Increased flexibility in the field of operational activities
  • Savings during construction
  • Reduction of the risk of the project – separated pieces of equipment

The CTCM 4OO is a professional tool dedicated to companies who value precision, time-saving, quality and safety.

Safety

The CTCM machines are designed in compliance with all safety standards.

 The CE marking is a symbol of the manufacturer’s declaration, indicating compliance with the requirements of the directives in force in the European Union.

These guidelines cover issues related to the safety of use, protection of health and the environment. They determine the danger that the manufacturer should detect and eliminate.

  • CHECK THE TENSION OF TUBING FEED BELTS
    Weekly

  • CHECK THE CONDITION OF TUBING FEED BELTS
    Weekly

  • CLEAR THE PLEXIGLASS COVER AND CHECK FOR DAMAGE
    Monthly

  • CLEAN MACHINE COMPONENTS WITH COMPRESSED AIR OR SOFT BRUSH
    Monthly

  • CHECK, IF NECESSARY LUBRICATE THE KNIFE CART
    Monthly

  • CHECK THE KNIFE CONDITION
    Quarterly

  • CHECK THE OPERATION OF PNEUMATICS
    Quarterly

  • CHECK THE CONDITION OF ELECTRICAL CONNECTIONS
    Quarterly

  • MAKE SURE THAT THE DEVICE IS STABLE ON THE GROUND AND GUARANTEES SUFFICIENT STABILITY WHEN INSERTING AND CUTTING TUBING
    Quarterly

  • GREASING THE LATCHES AND BLOWING THROUGH THE DES MODULE
    Every 2 weeks

Similar from CTCM line